Our Services

Radio technology and mobile communications are among the most innovative markets worldwide. Almost every day, there are new developments in the areas of radio systems, modulation, protocols, use of frequency spectrums, national and international approval options, and environmental requirements.

Eurofins Electrical & Electronics conducts test scenarios for all new radio technologies. Our measuring equipment is state-of-the-art and validated by periodic calibration cycles. Radio measurements are carried out at state-of-the-art measuring stations, including in anechoic chambers.

Our services cover:

  • LTE
  • UMTS / HSDPA / HSUPA
  • GSM / GPRS / EGPRS
  • PMR / LMR / SRD
  • WLAN / Chirp / Bluetooth / ZigBee
  • DECT / DECT6.0 (UPCS)
  • GNSS

Eurofins Electrical & Electronics is accredited by DAkkS, A2LA, PTCRB-CTIA and Bluetooth®-SIG. We also offer development-accompanying measurements for different technologies.

Weiterhin bietet Eurofins Electrical & Electronics entwicklungsbegleitende Messungen für verschiedene Bereiche an.

We also offer the following testing services:

  • SAR
  • OTA
  • 2D-Antenna Pattern

International wireless testing and type approvals

Accredited testing and certification services are available for Radio equipment / wireless technology interfaces (sometimes referred to as intentional radiators) and RF devices. Eurofins E&E laboratories operate as notified and certification bodies under a number of national and international schemes. As such, we can help you gain access to global markets including, but not limited to:

  • Europe; Compliance with the Radio Equipment Directive (RED) 2014/53/EU for CE Marking
  • UK; Compliance with the Radio Equipment Regulations 2017 for UKCA Marking
  • United State of America; FCC testing and approvals
  • Canada; through ISED (formerly Industry Canada) testing and approvals
  • Japan; TELEC, Ordinance and ARIB testing and RCB approval according to the Japanese Radio Law at the Ministry of Internal Affairs and Communications (MIC)
  • Australia & New Zealand: ACMA Australian Communications and Media Authority (RCM mark)
  • Korea; Korea Communications Commission (KCC) approval at the Ministry of Science, ICT and Future
  • Planning (MSIP)
  • Vietnam; MIC
  • Taiwan; BSMI

We also have CTIA accredited test facilities; exemplary regional accreditation bodies are A2LA, SAS, DAkkS and CNAS.

Global market access

Our laboratories offer a bespoke global market access service to help you attain the necessary approvals and certifications in your chosen combination of markets and countries. We guide you through the compliance process; assess testing requirements, test for compliance with the necessary standards, co-ordinate transactions between manufacturers and authorities to gain the necessary type-approvals and certifications for your radio equipment / wireless products.

EU Notified Body

We operate as European Radio Equipment Directive (RED) 2014/53/ EU Notified bodies No. 0861 in Germany and No. 0980 in the US.

UK Third Country Body

We operate as a UK Third Country Body for the Radio Equipment Regulations 2017 No. 0980 in the US.

Service from our global network

Through our global network of Eurofins Electrical & Electronics laboratories, we can offer a extended range of testing and certfication services for wireless technologies including:

  • Dynamic Frequency Selection / Transmit Power Control
  • WLAN 802.11a/b/g/n/ac
  • FCC accredited and ISED Testing & Certification
  • FCC TCB services
  • Japanese TELEC (MIC RCB)
  • AS/NZS (ACMA, arpansa)
  • Specific Absorption Rate (SAR) Testing
  • Smart home wireless type approvals including Matter
  • Bluetooth® 5
  • Bluetooth® SIG (BQTF & BQC)
  • IEEE 802.15.4 (ZigBee)
  • GSM / EGPRS / UMTS / WCDMA / LTE / NB-IoT / LTE-M2M
  • CITA Accreditation for OTA performance testing
  • FRG1 5G Sub-6 & FRG2 5G mmWave OTA pre-testing
  • Mobile Network Operator Approvals (PTCRB)
  • Verizon ITL independent testing laboratory approvals
  • IEEE 802.15.4 (ZigBee)
  • RFID / NFC testing
  • DECT / DECT 6.0 (UPCS)
  • SRD / ANT+/CSS Chirp
  • PMR / LMR / Maritime
  • 2D Antenna Pattern Measurements
  • OTA / 3D Antenna Pattern Measurements
  • Ultra Low Power Active Medical Implants (ULP-AMI)
  • Testing to standards for compliance with the EU Radio Equipment Directive (RED) 2014/53/EU
  • Testing to standards for compliance with the UK Radio Equipment Regulations 2017

For full details of our services, please contact us.

Our scope of accreditations and certifications.

Our scope of accreditation and range of services are updated regularly. Comprehensive information about our accreditations and current services can be found on our Accreditation page.

Read more...

Contact our team of experts.

Contact our experts today to begin testing and certifying your products. We offer comprehensive testing, certification, and quality assurance services for electrical and electronic products, simplifying global regulatory compliance and accelerating your time to market.

Contact Us